Firing Instructions Glow

CERAMIC ARTISTS:

• These decals are generally applied as a third firing on top of an already fired glaze. Once applied, these decals need to be fired in a kiln to CONE 022 (1050-1080°F/ 565-580°C). Once fired, the decals become permanently fused with the glaze, similar to decorative dinnerware.
  Decal application and firing instructions can be found at this link. 

GLASS ARTISTS:

• These are low fire decals for glass glassware and drinkware.  Once applied, these decals need to be fired in a kiln to 1050-1080°F/ 565-580°C. Once fired, the decals become permanently fused with the glass.
  Decal application and firing instructions can be found at this link. 

ENAMEL ARTISTS:

• They are ideal for very thin copper enamel application, but would work on all type of enamel. Once applied, these decals need to be fired in a kiln to 1050-1080°F/ 565-580°C. Once fired, the decals become permanently fused with the enamel.
  Decal application and firing instructions can be found at this link.